A very young looking Jez posing for the Newspaper.
Performance tuning
Petit bot, hillclimb 1993
This is an annual event on the south cost incorporating quite an uneven surface, a long straight with a tight right hander on an adverse camber, followed by a twisty section and a wet surface where the stream crossed the road.
1992 - Running my TS200 motor this was great fun, wheelies from the corners and over the humps. I ran a 37.5 time, which actually beat two of the three 350 powervalve Yams. Must do this one again.
New motor:Under development The next motor is based around a TS. The stroke is 64mm with a 120mm Rotax rod. To achieve this the cases needed a considerable amount of welding and machining to ensure that the crank fitted but also retained stength as a very deep channel is needed in the cases for the conrod to have clearance. Additionally the cylinder needs to be 11mm longer than standard, using a Wiseco Suzuki TS250 piston. Read more here...
|
|
A very young looking Jez posing for the Newspaper.
|
Performance tuning
|